| |
|
RotoMount allows a great amount of flexability to do intallations easier.
|
|
Flanges can be trimmed to improve foot room.
Flanges should be trimmed to match contours of the dash to improve Acoustic coupling
|
|
Once you are done trimming you should remove the burrs and smooth the edges of the WaveGuide Body.
|
|
Up to 1/2 an inch can be cut from the flanges to improve leg room clearance if needed.
Up to 2 inches can be cut from the inside end of the WaveGuide to clear the consoles.
|
|
By aiming the WaveGuide up, you can improve the height of the image.
WaveGuides should never point down
|
|
By moving the WaveGuide you can adjust the position of the center stage.
|
| |
|
Previous Page
Next Page
|
