|
Porsche 993 Cabriolet
|
| |
|
Amplifier and Rack
The amplifier is a Brax 4 channel on a custom steel rack that
mounts to the shock towers. The amprack was designed so that no holes
would need to be cut into the car.
|
| |
|
8" in the door
The Dynaudio 360 set includes an 8" drivers. A set of custom made baffles
mount the 8" driver in the door. This is the passenger driver without the
door trim, so that the baffle can be seen.
|
| |
|
8" in the driver's door
This is a picture of the driver's door baffle with 8" woofer in place.
|
| |
|
8" in the driver's door
This picture shows the driver's door with the 8" driver behind the lower
door trim, but without the stock grills in place.
|
| |
|
8" in the door, Completed.
This picture shows the passenger's door with the car reassembled. The
8" driver is not visible and the car retains its stock look.
|
| |
|
Driver's Side Kick Panel
The remaining two drivers were placed into custom kickpanels on each
side of the car. The driver's kick panel is integrated with factory
carpet and looks nearly stock.
|
| |
|
Passenger's Side Kick Panel
The remaining two drivers were placed into custom kickpanels on each
side of the car. The passenger-side kick panel is integrated with factory
carpet and looks nearly stock.
|
| |
